st. Danila Nechaya, 65/325
Concrete frost resistance test chambers (CIB)
The presented equipment is intended for testing heavy, fine-grained, light and dense silicate concretes, including concretes of road and airfield pavements for frost resistance, the third accelerated method.Order equipment
- Temperature range from -55ºC to + 50ºC with a control accuracy of 0.1ºC
- Holds up to 12 pieces of samples
- Viewing window
|Chamber volume, l||150|
|Useful volume size, WxHxD,mm||500×600×500|
|Overall dimensions, WxHxD, mm||900×1900×1200|
|Temperature range||-55…+50 °С|
|Preset temperature control error||±0,1 °С|
|Uneven temperature distribution over the working volume in the steady-state thermal regime||±2,0 °С|
|Solution temperature up||to 20 °С|
|Mains voltage||380V / 50Hz / 3F|
We can manufacture equipment according to your technical specifications
Description of KIB series equipment
The presented equipment is intended for testing heavy, fine-grained, light and dense silicate concretes, including concretes of road and airfield pavements for frost resistance, the third accelerated method.
The main characteristics of the chamber for testing concrete of the "KIB" series
Chamber volume: 150 l
Sample capacity: 12 pcs
Useful volume, WxHxD: 500 × 600 × 500 mm
Overall dimensions, WxHxD: 900 × 1900 × 1200 mm
Temperature range: -55 ... + 50 ° С
Preset temperature control error: ± 0.1 ° С
Uneven temperature distribution over the working volume in the steady-state thermal regime: ± 2.0 ° С
Solution temperature: up to 20 ° С
Removable shelf: 2 pcs
Viewing window: yes
Supply voltage: 380V / 50Hz / 3F
The body of the chamber for testing concrete for frost resistance is made of stainless steel, covered with powder paint.
Two-stage refrigeration machine based on European-made compressors.
Cooling of compressor units: air.
The working volume is made of stainless steel, two removable lattice shelves are installed inside.
Two stainless steel containers (6 samples per container).
The principle of operation of the chamber for testing concrete for resistance to low temperatures:
Test specimens with dimensions of 100x100x100 mm in containers closed from above with a 5% aqueous solution of sodium chloride are placed in containers and placed in the working volume of the chamber. The temperature in the chamber is lowered to -50 ˚C and held for 2.5 hours. After that, the temperature in the working volume is increased and the samples are thawed in a solution with a temperature of 20 ˚C for at least 2.5 hours. The number of cycles is set by the program. After a predetermined number of cycles, the samples are examined.
The program runs automatically.
Leave your details and our manager will contact you and agree on the terms of referenceOrder equipment
We provide warranty and post-warranty service for testing equipment.